e-PlanSoft’s Scout™ Tool inspects PDFs uploaded directly to e-PlanREVIEW® (EPR) as well as PDFs sent over by integrated partners using EPR’s Connect APIs.
...
| Note |
|---|
Uploaded files may have issues that are not inspected by Scout, such as not conforming to an Agency’s specific submittal (or resubmittal) practices. Agency staff are still encouraged to view incoming submittal files after Scout’s automated inspection. Scout is a supplement to, not a replacement for, agency staff inspection. |
...
Scout in EPR
Scout will inspect any PDFs uploaded to EPR under the “PLANS” file type to ensure they can be processed and viewed correctly within EPR, whether uploaded directly from inside EPR or when routed over by an integrated partner.
| Info |
|---|
Files submitted as “ATTACHMENTS” are not analyzed by Scout because attachments are not viewed within EPR, nor are they used to create plan review assignments. |
Uploading Files
To upload a file directly into EPR:
Open an existing project record.
Click on the DOCUMENTS tab.
Click
(upload) on the lower right.In the upload screen, either click on SELECT FILES or drag and drop files into the file window.
If you need to upload more files, click on
(add) on the lower right. Additional files will be added to the current list.
Files are sorted into either “PLAN” or “ATTACHMENTS” windows based on file type:
PDFs are listed under “PLAN” by default, but can be dragged over to the “ATTACHMENTS” window if needed.
All non-PDFs are listed under “ATTACHMENTS” by default. These cannot be moved.
...
DOCUMENTS Tab
...
File Upload Screen
...
File Sorting Screen
...
Processing Files
Once files are sorted, click on PROCESS to begin the inspection of the files listed under “PLANS.”
A window will pop up to show the progress of each file being inspected by Scout. (Larger files may take longer to inspect.)
Once all files are inspected, the progress window closes and the screen reloads. The results of the inspection are displayed as a file status.
...
Scout is Part of the Upload Process
The document upload process that involves Scout is summarized below, though for more details, refer to Document Upload.
Files are uploaded (either to EPR or to an integrated partner).
For integrations, additional steps may be required before files are routed over to EPR. Consult with your implementation workflow guidelines for the exact steps.
Files are processed and checked by Scout.
For integrations, Scout inspection may occur twice: once when the file is uploaded to the partner system, then again when the file is routed to EPR from the partner system.
If files pass Scout inspection, the upload/routing process is completed.
Files will render and then become available for plan review.
Evaluating Scout Results
During Upload
Scout inspects uploaded PDF plans to ensure they are accessible, readable, and that they meet EPR’s conditions for submittal across several categories.
...
PDFs that pass the Scout inspection will display a
(green checkmark) icon under the “Status” and can be accepted for plan review.PDFs that fail the Scout inspection will display a ❌ (red x) under the “Status” and cannot be accepted for plan review.
...
Process Button
...
Progress Window
...
File Status (Scout Results)
...
Evaluating Scout Results
Clicking on the (eye) icon
| Info |
|---|
While uploading files directly within EPR, detailed Scout results can be viewed by clicking on View Scout Results ( |
...
summarizes whether the file passed or failed |
...
each condition. |
Conditions that pass the inspection are identified with a
( green checkmark symbol ( ).Possible problems requiring user attention are identified with a
( yellow warning signsymbol ( ) and are described in more detail.Confirmed problems requiring correction before submittal are identified with a ❌ (red xred X symbol ( ❌ ) and are described in more detail.
Scout Warnings
Scout displays a warning symbol for conditions that it thinks a user may want to manually inspect further before completing the file upload.
Files with warnings 
EPR determines whether a document will pass or fail Scout inspection based on the results of all the inspected conditions.
Inspection Results | Overall Document Scout Status | Document Upload Status Symbol |
|---|---|---|
All conditions pass inspection. | Document passes Scout inspection. | Green Checkmark symbol ( |
One or more conditions trigger a warning, but no failures. | Document passes Scout inspection (except in cases where an integrated partner is configured to automatically rejects files that trigger a warning). | Yellow Warning symbol ( |
One or more conditions fail inspection. | Document fails Scout inspection. | Red X symbol ( ❌ ) |
Scout Warnings
Although files with warnings are considered to have passed inspection and can still be uploaded to EPR, however, the type of warning may indicate that staff should stop the upload process, inspect the file manually, and address a potential issue before proceeding.
| Note |
|---|
With “Page Rotation/Orientation,” for example, Scout can identify if file When a warning is triggered by “Different orientation on pages” (see example screenshot above), Scout has identified that the PDF document pages have a mix of landscape and portrait orientations within the PDF, but it . Scout cannot determine if these whether the pages are upright, sideways, or upside-down. A user would have to manually inspect the file to confirm if they have the correct orientation, but it is a possibility and may merit manual inspection before the file is uploaded to EPR. Otherwise, users may have to rely on EPR’s built-in rotation tools to correct pages submitted with the wrong orientation. |
...
If a document failed Scout inspection, you cannot finish uploading it to EPR until the issuecondition(s) identified by Scout are corrected.
...
Address whatever condition(s) Scout marked as failed, either in the PDF or by going back to the program that created the CAD file and generating a new PDF.
Delete file(s) that failed Scout by clicking on the Delete (
(Delete ) icon.Upload the corrected file(s) to EPR and ensure it/they now passes pass Scout inspection.
| Warning |
|---|
Until all files that failed Scout inspection are removed from the upload list, you cannot finish uploading files to EPR. |
Scout Warnings | Scout Failures | Deleting Files |
|---|---|---|
 |  |  |
After Upload
After files have been upload successfully, you can revisit their original Scout inspection results from the DOCUMENTS tab (for the latest submittal) or by drilling down into the DOCUMENTS > Submittals sub-tab (to view results for any of the document’s submittals) and clicking on View Scout Results ( ).
...
Finishing Uploads
...
Once all plan files have successfully passed Scout inspection, click FINISH to complete the upload process can be completed by clicking FINISH.
Plan files will go to the INTAKE page, ready for you to create new or provided updated review assignments.
Attachment files will be processed automatically and can be accessed from either:
The project ATTACHMENTS tab
By clicking the Attachments Tool (
) in the EPR Review page
Conditions Inspected by Scout
Below is a list of inspected conditions and Scout’s expected default behavior. If an agency modifies this default
| Info |
|---|
For more detailed instructions, refer to Completing File Uploads. |
...
Conditions Inspected by Scout
Scout is available in two versions: a default version as well as a configurable version which is available upon request to upgrade. (To upgrade, consult your e-PlanSoft Client Success Manager.) Beginning in Summer of 2023, new clients (or existing clients who have requested to upgrade) will be able to use configurable Scout to inspect incoming document files.
Default Scout (Legacy Configuration)
The default Scout will check incoming plan files for potential issues as noted in the table below.
Issue | Behavior | Solutions |
|---|---|---|
ACCESSIBLE | Checks if the file is invalid (such as a PDF Portfolio file), corrupt, or password protected. | Determine whether the PDF can be opened by Adobe Reader and confirm it is not a PDF Portfolio (set of embedded PDFs). If it cannot be opened, return to the source program and create a new file. Remove password protection, if applicable. |
FILENAME | Checks if filename contains any of the following restricted characters and rejects the file if it does. Restricted list: !, *, ', \, ;, :, @, &, =, +, $, , (comma), /, ?, %, #, [, ], ", <, >, | | Remove any restricted characters from the filename and re-upload the file. |
SIZE | Documents must not exceed 400 MB (419430400 bytes). | Return to the source program and create a new file that is below the file size limitation, if possible. Alternatively, break up a large PDF into multiple smaller PDF files. Optimizing a PDF may also reduce its file size. |
PAGE COUNT | Checks that the incoming PDF page count does not exceed the maximum page count (500 pages) and rejects if the file does. | Split files with too many pages into smaller subsets and submit files separately. |
TEXT CONTENT | Checks whether PDF text and fonts are present and legible within the incoming PDF . | Properly embed or substitute missing fonts. Using true type fonts is recommended. |
VERSION | Checks whether the incoming PDF version is 1.3 or newer. Older PDF versions will be rejected. (Version 1.3 was released July 2000 and is used as the default version for PDFs created on Apple devices). | Return to the source program and create a new file using a newer PDF version. |
PAGE ACCESS | The inspector tries to read each page in the document. If a page is not readable, the file will be rejected. | File pages or page data may be damaged or in need of repair. Recreate the PDF from the source document using Adobe Pro, Nitro Pro, or another full-featured PDF editor. |
ANNOTATION | Checks whether annotation data (embedded objects, like AutoCAD-generated SHX Text comments that appear in pdf reader Comment panels or) exist and provides a warning if annotations are found. | Remove annotations from the PDF, if possible. This can be done by reprinting the file to a new PDF using a PDF editor. Otherwise, return to the source program and generate a new PDF without annotations from the start. |
METADATA | Check whether hidden content and unexpected metadata like embedded Flash, images, or others exist. | Remove hidden content by following the instructions listed in the EPR Wiki document “How To Remove Metadata from PDF”. |
SIGNATURE | Checks for the presence of a digital signature within the PDF. | Add a digital signature to the PDF if one is required before submitting. |
ATTACHMENT | Checks if any attachments exist within the PDF and rejects the file if any are found. | Return to the source program and create a new file without any attachments or reprint the PDF as new to remove attachments using a PDF editor. |
RESOLUTION | Checks whether any document pages have a very low resolution (in pixels) based on page dimensions, and may return a warning if any found. | Return to the source program/scanner and create/scan a new PDF with a higher resolution. |
ROTATION | Checks the orientation of document pages and whether they match, using the orientation (landscape or portrait) of the first document page as a reference and then determines if all other pages have the same orientation. If any other page does not, this will trigger a warning. Scout does not look at page content so it cannot determine if pages are upside-down or sideways, for example. | Manually check that pages within the PDF are not rotated incorrectly (upside-down or sideways) is recommended. Individual page rotation can also be corrected within EPR. |
Configurable Scout
Client environments created after Summer 2023 (or existing clients who have upgraded) will each have their own configurable version of Scout which Administrators can manage directly within EPR (and goPost, if EPR is integrated with goPost). While this version of Scout checks for the same potential issues as the original, agencies can adjust several of these settings to their liking, as stated below.
| Info |
|---|
If your Agency has modified your configurable Scout behavior, you may need to consult with an agency |
...
Administrator for further instruction. |
Issue | Is Active | Is Configurable | Configurations | Default Behavior | Default Result | Solution |
|---|---|---|---|---|---|---|
ACCESSIBLE | Y | N | N/A | Checks if the file is invalid (such as a PDF Portfolio), corrupt, or password protected. | REJECTION | Determine whether the PDF can be opened by Adobe Reader and confirm it is not a PDF Portfolio. If the PDF cannot be opened, create a new PDF from the source program. Remove password protection, if applicable. |
FILENAME | Y | N | Filename Special Characters | Checks if filename contains: !, *, ', \, ;, :, @, &, =, +, $, , (comma), /, ?, %, #, [, ], ", <, >, | characters. Characters cannot be edited. | REJECTION | Remove these any restricted characters from the filename and re-upload the file. |
SIZE | Y | Y | Minimum/Maximum PDF size (in bytes) | Documents must not exceed 400 MB (419430400 bytes). This configuration can be increased above 400 MB, but the recommended maximum size is 2 GB. | REJECTION | Return to the source document program and create PDF files that are a new file that is below the file size limitation or , if possible. Alternatively, break up a large PDF into multiple smaller PDF files. Optimizing a PDF can may also help reduce its file size. Follow the instructions in the DOCUMENT SUBMITTAL RECOMMENDATIONSThe Agency can also choose to increase the acceptable limit within stated range. |
PAGE COUNT | Y | Y | Maximum page count | Checks the PDF page count based on the configured maximum page count. The default is set to 500 pages but can be increased up to a recommended maximum of 1200 pages. | REJECTION | Split large files with too many pages into smaller subsets and submit files separately or the . The Agency can also choose to increase the maximum page count up to a max of 1200. |
TEXT CONTENT | N | Y | N/A | Checks whether PDF text and fonts are present and legible. | N/A | Properly embed or substitute missing fontfonts. Using true type fonts is recommended. |
VERSION | Y | N | N/A | Checks PDF version. If PDF version older than 1.4 is detected, the file will be rejected. (Version 1.4 was released prior to 2001.) This can be changed but any version prior to 1.3 is not recommended. | Warning | None required but it is recommended to update the PDF to a newer Return to the source program and create a new file using a newer PDF version. |
PAGE ACCESS | Y | Y | N/A | The inspector tries to read each page in the document. If a page is not readable, the file will be rejected. | REJECTION | Adobe Reader may report these pages as File pages or page data may be damaged or in need of repair. Recreate the PDF from the source document using Adobe Pro or Pro, Nitro Pro, or another full-featured PDF editor. |
ANNOTATION | Y | Y | Can be configured to ignore annotations and accept PDF file. | Checks for annotations that appear in the pdf reader ‘Comment’ panel, such as SHX Text generated by AutoCAD. | REJECTION | Remove annotations from the PDF, if possible. This can be done by reprinting the file to a new PDF using a PDF editor. Otherwise, return to the source program and generate a new PDF without annotations from the start. |
METADATA | Y | Y | N/A | Check hidden content and unexpected metadata like embedded Flash, other PDFs, etc. | Warning | Remove hidden content by following the instructions listed in the EPR Wiki document “How To Remove Metadata from PDF”. |
SIGNATURE | Y | Y | N/A | Checks for the presence of a digital signature in the PDF, but cannot validate the source’s authenticity. | WarningValidates | that the signature exists but cannot confirm source authenticityAdd a digital signature to the PDF if one is required before submitting. |
ATTACHMENT | Y | Y | N/A | Checks if any attachments exist in the PDF. | REJECTION | Recreate the PDF Return to the source program and create a new file without any attachments or reprint the PDF as new to remove attachments using a PDF editor. |
RESOLUTION | Y | Y | Minimum/Maximum pixel count | Checks pages for low resolution (in pixels) based on page dimensions. | Warning | Create Return to the source program/scanner and create/scan a new PDF from the source with a higher resolution. |
ROTATION | Y | Y | N/A | Checks if a document has mixed page orientations based on the orientation of the first page. Scout does not look at page content so it cannot determine if pages are upside-down, for example. | WarningNone required. | Manually checking check that pages within the PDF are not rotated incorrectly (upside-down or sideways) is recommended. Page Individual page rotation can now also be corrected within EPR. |
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|
...